environment control
We utilize several strategies to provide economic and energy saving solutions. Methods employed vary depending on site, local codes and owner requirements. Although these methods are proven to be effective, it is the owner/occupant’s responsible environmental practices which truly affect performance.
design methods
Design and configuration of the building is the first and foremost method of managing energy performance and savings. While materials and mechanical equipment provide a supplemental way of regulating the interior environment, utilization of natural conditioning offers the most cost effective and energy free way of managing indoor temperature and air quality. By utilizing techniques to take advantage of natural cross ventilation and solar impact, we can offset the need for using mechanical systems to regulate interior temperature.
combination furnace unit
A combination furnace incorporates your standard furnace, boiler and domestic hot water all in one self-contained unit. By combining these functions in one system, you require less energy to operate compared to seperate dedicated units. This also results in a reduction of maintenance. Unit effiency is achieved though the latest advances in heat recovery and distribution.
ground source heat pump
Ground source heat pumps are generally used for heating and cooling a building’s interior by transferring heat stored in the earth or ground water into the building during the winter, and transferring heat out of the building in the summer. Because the ground below the earth’s surface maintains a relatively constant temperature throughout the year, this system offers a low cost and efficient way of controlling interior temperature. This technology may also be incorporated into the hot water system for preheating purposes. The basic mechanics involve installing a loop of pipe either horizontally or vertically into the ground which circulates fluid through the use of the heat pump unit. The heated or cooled air is distributed by a conventional ductwork system throughout the building.
radiant floor system
Hot water from the boiler is pumped over or under the sub-floor via a series of conduits which radiate heat evenly and efficiently throughout the building. The use of radiant heat has proven to be an effective alternative to forced air due to it’s thermal sink and lower operating temperature. Each area of the building can be zoned and controlled to maximize efficiency.
